Product Categories
(Total 12 Products for Tracklink Oil Seal Isused For Excavator)
Suitable for dozer loader track idler seals floating oil seals Excavator track link oil seal is applicable to all kinds of crawler equipment, and also belongs to the category of seal repair kit, and the category of anti-wear ring is also widely used, During storage, seal products may become hard and soft due to...
Excavator cylinder piston rod seals IDI-SRUV
Excavator cylinder piston rod seals IDI-SRUV Excavator cylinder piston rod seals Design description: The SRU features an asymmetrical double lip piston seal constructon that provides the most suitable sealing for light and medium load applicatons. when the secondary seal is used with the SRT support gasket, it can be...
Excavator oil cylinder dustproof seals DKBI SRD
Excavator cylinder dust seal DKBI is usually used in the following scenarios:
1. Excavator hydraulic system: The hydraulic system of the excavator uses a large number of oil cylinders. These oil cylinders need to use seals to prevent dust, sand and other impurities from entering the interior of the oil cylinder to...
Excavator tension cylinder main oil seal OUY
Excavator tension cylinder main oil seal OUY Excavator Cylinder Piston Seals OUYProduct Description: OUY professional sealing products, the composition is polyurethane (PUR)
Applicable to: SUMITOMO, HITACHI, KATO, KOBELCO, CATERPILLAR, KOMAILU, and other brands of excavators.
Suitable for excavators, boom, middle...
Excavator cylinder piston rod seals SRT-ABA-Orange
1. Clean the installation position of the piston rod and sealing ring to ensure that there is no dust, grease, or other debris.
2. Place the sealing ring into the sealing groove of the piston rod, ensuring that the direction of the sealing ring is correct.
3. Apply lubricating oil or grease to the surface of the...
Excavator oil cylinder dustproof seals DKBI SRD Orange
There must be a dust-free area during installation to prevent dust from entering the system during installation
Each installation component must be clean, including iron filings, rust, paint, welding slag, etc.
Hydraulic oil will gradually deteriorate and oxidize during operation, and it is necessary to replace the...
Special seal for SPGW piston seal
1. Install the SPGW seal on the piston in the correct order. The order of seals is usually from inside to outside: O-ring seal, support ring, guide ring, and U-shaped seal ring.
2. Gently insert the piston into the hydraulic cylinder by hand, ensuring that the seal is not damaged or stuck.
3. Use hydraulic pressure to...
Excavator cylinder dust seal DKB black
Excavator cylinder dust seal DKB black
DKB SRD Orange Design Description:
SPRSEALS Excavator Cylinder Piston Rod Seals Polyurethane dust lip can be moved laterally with the piston rod,
Polyurethane dust lip is precisely trimmed to allow phones to pass through Piston rod sealing media, especially The designed dust lip...
Excavator oil distribution cup seal SPN
The SPN seal for the excavator oil distribution cup is an important component on the excavator, mainly used to seal the excavator oil distribution cup and prevent oil leakage. Its applications mainly include the following aspects:
1. Prevention of oil leakage: The main function of the excavator oil cup seal SPN is to...
Excavator oil cylinder dustproof seals DKBI SRD Ivory
Design Description:
Excavator Cylinder Piston Rod Seals DKBI is a double lip metal frame wiper. It is firmly held together by a polyurethane wiper ring and nitriding and rust-resistant restraints.
Polyurethane dust lip is precisely trimmed to allow phones to pass through Piston rod sealing media,
especially The...
Track link oil seal for excavator However, polyurethane elastomer coating ring and protection ring run continuously for 1800 times without wear Other materials, such as rice husk roller for rice mill, vibrating sieve plate for coal separator, track for sports field, dynamic oil seal for lifting shovel, elevator wheel,...
Excavator Cylinder Seals Buffer Ring HBY-SRB
Excavator Cylinder Seals Buffer Ring HBY-SRB
Design description:
Excavator Cylinder Piston Rod Seals The SRB piston rod buffer seal is designed for use with piston rodseals. Such as the SRU, SRUV, high
frequency pressure can be put in the system of primary seal damage. Excavator cylinder oil seals SRB is an excellent...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Tel: +86-020-32017236
Mobile Phone: +8618024069172
Email:sprseals001@126.com
Website: https://www.jolseals.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.