Excavator Cylinder Piston Rod Seals Aba Srt

Excavator cylinder piston rod seals SRT-ABA

• Brand: SPRSEALS
• Packaging: carton,packaging bag
• Supply Ability: 100,000 pieces per month
• Min. Order: 1 Barrel/Barrels

Material :Filled PTFE or PA Filled PTFE -55~220°C，PA-55~120°C Filled PTFE max=35mpa， PA max=70mpa Used primarly as an anti-extrusion device for u-seals, these back-up rinas combine high performance with very lowfriction. Can reduce failure rate while improving work efficiency SRT-ABA Black Excavator cylinder piston...

Contact Now

Excavator cylinder piston rod seals SRT-ABA-Orange

• Brand: SPRSEALS
• Packaging: carton,packaging bag
• Supply Ability: 100,000 pieces per month
• Min. Order: 1 Barrel/Barrels

1. Clean the installation position of the piston rod and sealing ring to ensure that there is no dust, grease, or other debris. 2. Place the sealing ring into the sealing groove of the piston rod, ensuring that the direction of the sealing ring is correct. 3. Apply lubricating oil or grease to the surface of the...

Contact Now

Excavator cylinder piston rod seals SRT-ABA-Copper Powder

• Brand: SPRSEALS
• Packaging: carton,packaging bag
• Supply Ability: 100,000 pieces per month
• Min. Order: 1 Barrel/Barrels

Operating steps for replacing the sealing ring of the oil cylinder: 1. Open the excavator key, start the excavator, and open the safety lock. Lower the working device to the ground, turn off the engine, and then turn on the key power supply. Shake the operating handle several times at will to release the residual...

Contact Now